優價供應PLC221鎦程測定儀

一、用途及適用范圍
本儀器是根據中華人民共和國標準GB/T6536《石油產品蒸餾測定法》規定的要求設計制造的，適用于按GB/T6536的標準對汽油、航空汽油、噴氣燃料、特殊沸點的溶劑、石腦油、柴油、餾分燃料和相似的石油產品的蒸餾測定。

優價供應PLC221鎦程測定儀

二、主要技術參數及技術特點
（一）主要技術參數
⑴ 工作電源：    AC220V±10%，50Hz。
⑵ 電爐加熱功率：1000W。
⑶ 量筒容積：    100毫升，分度1毫升。
⑷ 蒸餾燒瓶：    125mL，符合GB/T6536的要求。
⑸ 溫度計：      全浸棒式，刻度范圍分別(-2～+300)℃和(-2～+400)℃兩種，分度為1℃。
⑹ 電爐活動板：  碳化硅板制造，孔徑分別為φ38㎜、φ50㎜。
⑺ 溫控儀:       ① 控溫范圍： 室溫～90℃任意設置。
② 控溫精度：  ±0.5℃。
③ 溫度顯示方式： LED數字顯示。
⑻ 浴槽加熱功率：1800W
⑼環境溫度：    ≤+30℃。
⑽相對濕度：    ≤85%。
⑾ 整機功耗:     不大于3000W。

PLC221 determination of distillation range tester

A, application and applicable scope

The instrument is according to the regulations of the people's Republic of China standard GB/T6536 "petroleum products Determination of distillation method" the requirements of design and manufacture, is suitable for the determination of distillation according to the criteria of GB/T6536 for gasoline, aviation gasoline, jet fuel, special the boiling point of the solvent naphtha, distillate fuel, diesel, and similar petroleum products.

Two, main technical parameters and technical features

(a) the main technical parameters

The working power supply: AC220V + 10%, 50Hz.

The electric heating power: 1000W.

The cylinder volume: 100 ml, 1 ml of indexing.

The distillation flask: 125mL, meet the requirements of GB/T6536.

The thermometer: Immersion rod type, scale range respectively (-2 ~ +300) C and (-2 ~ +400) C two, dividing 1 C.

When a "furnace activity board: silicon carbide board manufacturing, aperture respectively Phi 38 mm, 50 mm in diameter.

Water temperature controller: temperature range: room temperature to 90 DEG C arbitrarily set.

The temperature control precision is + - 0.5 deg.

The temperature display: LED digital display.

Therefore the bath heating power: 1800W

Only the temperature of the environment: less than +30 DEG C.

That relative humidity is less than or equal to 85%.